Profil
Jovana Ružić
Zvanje:
Viši naučni saradnik
Direktni telefoni:
Lokal:
Naučna oblast:
2
Veće oblasti:
Materijali,
Orcid broj:
Organizaciona jedinica:
170
DIPLOME
-
Sinteza i karakterizacija kompozita sa osnovom bakra ojačanog nano- i mikro česticama ZrB2
metalurško inženjerstvo
ZVANJA
M faktor
| Kategorija | Broj | Koeficijent | Ukupno |
|---|
Ukupno M faktor:
0
NI radovi
| # | Naziv, Datum, Grupa, Vrsta | Godina | Autori | Status | |
|---|---|---|---|---|---|
| 1 |
An investigation on synthesis development of high hardened, high conductivity Cu-Zr and Cu-Zr-ZrB2 alloys through green compact laser sintering
The International Journal of Advanced Manufacturing Technology , / , 2015 M20 | M21 |
2015 | Јелена Сташић, В. Рајковић, Јована Ружић, Душан Божић |
Odobren
|
|
| 2 |
Biomimetic synthesis and properties of cellular SiC
Ceramics International , , 2014 M20 | M21 |
2014 | M. Gordic, D. Bucevac, J. Ruzic, S. Gavrilovic, R. Hercigonja, M. Stankovic, B. Matovic |
Odobren
|
|
| 3 |
Effect of synthesis parameters on structural and mechanical properties of Ti3Al–Nb–Mo intermetallic compound obtained by powder metallurgy techniques
Transactions of nonferrous metals society of China , , 2017 M20 | M21 |
2017 | B. Dimčić, J. Stašić, J. Ružić, D. Božić |
Odobren
|
|
| 4 |
Laser sintering of Cu–Zr–ZrB2 composite
Applied Surface Science , , 2014 M20 | M21 |
2014 | J. Stašić, M. Trtica, V. Rajković, J. Ružić, D. Božić |
Odobren
|
|
| 5 |
Strengthening effects in precipitation and dispersion hardened powder metallurgy copper alloys
MATERIALS & DESIGN , , 2013 M20 | M21 |
2013 | Јована Ружић, Јелена Сташић, В. Рајковић, Душан Божић |
Odobren
|
|
| 6 |
Structural, mechanical and tribological characterization of Zn25Al alloys with Si and Sr addition
Materials & Design , / , 2014 M20 | M21 |
2014 | Aleksandar Vencl, Ilija Bobić, Filip Vučetić, Biljana Bobić, Jovana Ružić |
Odobren
|
|
| 7 |
Synthesis and properties of a Cu-Ti-TiB(2) composite hardened by multiple mechanisms
Materials Science and Engineering A , , 2011 M20 | M21 |
2011 | D. Božić, J. Stašić, J. Ružić, M. Vilotijević, V. Rajković |
Odobren
|
|
| 8 |
Synthesis, microstructure and mechanical properties of ZrB2 nano and microparticle reinforced copper matrix composite by in situ processings
Materials and Design , , 2014 M20 | M21 |
2014 | J. Ružić, J. Stašić, V. Rajković, D. Božić |
Odobren
|
|
| 9 |
Edible blend films of pectin and poly (ethylene glycol): Preparation and physico-chemical evaluation
Food Hydrocolloids , , 2018 M20 | M21a |
2018 | S. Šešlija, A. Nešić, J. Ružić, M. Kalagasidis Krušić, S. Veličković, R. Avolio, G. Santagata, M. Malinconico |
Odobren
|
|
| 10 |
High pressure densification of nanocrystalline mullite powder
Ceramics International , / , 2016 M20 | M21a |
2016 | Светлана Илић, Славица Зец, Милена Росић, Весна Максимовић, Ј. Ружић, Урбанович Владимир, Бранко Матовић |
Odobren
|
|
| 11 |
Microstructural characterization and artificial aging of compo-casted hybrid A356/SiCp/Grp composites with graphite macroparticles
Materials Science and Engineering A , / , 2014 M20 | M21a |
2014 | Илија Бобић, Јована Ружић, Биљана Бобић, Мирослав Бабић, Александар Венцл, Слободан Митровић |
Odobren
|
|
| 12 |
Mo segregation and distribution in Ti–Mo alloy investigated using nanoindentation
Materials Science and Engineering A , , 2018 M20 | M21a |
2018 | J. Ruzic, S. Emura, X. Ji, I. Watanabe |
Odobren
|
|
| 13 |
Pectinpolyvinylpyrrolidone films: A sustainable approach to the development of biobased packaging materials
Composites Part B: Engineering , , 2017 M20 | M21a |
2017 | A. Nešić, J. Ružić, M. Gordić, S. Ostojić, D. Micić, A. Onjia |
Odobren
|
|
| 14 |
Safe trapping of cesium into pollucite structure by hot-pressing method
Journal of Nuclear Materials , / , 2016 M20 | M21a |
2016 | Миа Омерашевић, Љиљана Матовић, Јована Ружић, Жељко Голубовић, Урош Јовановић, Славко Ментус, Вера Дондур |
Odobren
|
|
| 15 |
Temperature-dependent deformation behavior of γ and γ′ single-phase nickel-based superalloys
Materials Science and Engineering: A , , 2021 M20 | M21a |
2021 | Jovana Ruzic, Kenta Goto, Ikumu Watanabe, Toshio Osada, Liberty Wu, Takahito 2021Ohmura |
Odobren
|
|
| 16 |
Transformation of Cs-exchanged clinoptilolite to CsAlSi5O12 by hot-pressing
Ceramics International , , 2017 M20 | M21a |
2017 | M. Omerašević, J. Ružić, B. Nedić-Vasiljević, Z. Baščarević, D. Bučevac, J. Orlić, Lj. Matović |
Odobren
|
|
| 17 |
Microstructural and basic mechanical characteristics of ZA27 alloy-based nanocomposites synthesized by mechanical milling and compocasting
Journal of Composite Materials , , 2018 M20 | M22 |
2018 | B. Bobić, A. Vencl, J. Ružić, I. Bobić, Z. Damnjanović |
Odobren
|
|
| 18 |
Microstructure and properties of gravity sintered 316L stainless steel powder with nickel boride addition
Science of Sintering , / , 2016 M20 | M22 |
2016 | Душан Божић, Мирољуб Вилотијевић, Јована Ружић, Урош Јовановић, Јелена Сташић |
Odobren
|
|
| 19 |
Removal of Cs Ions from Aqueous Solutions by Using Matrices of Natural Clinoptilolite and its Safe Disposal
Science of Sintering , , 2016 M20 | M22 |
2016 | M.Omerašević, J.Ružić, N.Vuković, U.Jovanović, M.Mirković, V.Maksimović, V. Dondur |
Odobren
|
|
| 20 |
Synthesis and characteristics of precipitation hardened Cu-Cr alloy and multiply hardened Cu-Cr-Al2O3 nanocomposite obtained using powder metallurgy techniques
International Journal of Materials Research , , 2014 M20 | M22 |
2014 | D. Bozic, J. Ruzic, J. Stasic, V. Rajkovic |
Odobren
|
|
| 21 |
Synthesis and Characterization of CuZrB2 Alloy Produced by PM Techniques
Science of Sintering , , 2014 M20 | M22 |
2014 | J. Ružić, J. Stašić, S. Marković, K. Raić, D. Božić |
Odobren
|
|
| 22 |
Synthesis and multiple hardening of a rapidly solidified iron-based matrix
The International Journal of Advanced Manufacturing Technology , , 2018 M20 | M22 |
2018 | D. Božić, N. Stanković, J. Ružić & J. Stašić |
Odobren
|
|
| 23 |
Microstructural and mechanical properties of Cu-7vol.%ZrB2 alloy produced by metallurgy processing techniques
Science and Engineering of Composite Materials , , 2015 M20 | M23 |
2015 | J. Ružić, J. Stašić, V. Rajković, K. Raić, D. Božić |
Odobren
|
|
| 24 |
Nano-Indentation Measurement for Heat Resistant Alloys at Elevated Temperatures in Inert Atmosphere
Materials Transactions , , 2019 M20 | M23 |
2019 | J. Ruzic, I. Watanabe, K. Goto, T. Ohmura |
Odobren
|
|
| 25 |
Data analytics approach to predict the hardness of copper matrix composites
Metallurgical and Materials Engineering Journal , , 2020 M20 | M24 |
2020 | Somesh Kr. Bhattacharya, Ryoji Sahara, Dušan Božić, Jovana Ružić |
Odobren
|
|
| 26 |
Effect of process parameters on the phase transformation kinetics in copper-based alloys and composites
Metallurgical and Materials Engineering Journal , , 2020 M20 | M24 |
2020 | Marko Simić, Nenad Radović, Milan Gordić, Jovana Ružić |
Odobren
|
|
| 27 |
Innovative processing routes in manufacturing of metal matrix composite materials
Metallurgical and Materials Engineering , , 2021 M20 | M24 |
2021 | J. Ružić, M. Simić, N. Stoimenov, D. Božić, J. Stašić |
Odobren
|
|
| 28 |
Special Issue "Multiscale Modelling and Characterization of Mechanical Properties in Heat-Resistant Alloys"
Crystals , , 2021 M20 | M28b |
2021 | Ikumu Watanabe, Nobufumi Ueshima, Jovana Ruzic, Hongzhi Cui |
Odobren
|
|
| 29 |
Composite materials - novelties in manufacturing and application
Metallurgical and Materials Engineering Journal , , 2021 M20 | M29v |
2021 | Jovana Ružić |
Odobren
|
|
| 30 |
Analysis of the particle motion during mechanical alloying using EDEM software
19th IFAC Conference on Technology, Culture and International Stability (TECIS-2019) , , 2019 M30 | M33 |
2019 | N. Stoimenov, J. Ruzic |
Odobren
|
|
| 31 |
Influence of mechanical alloying time on particle size of copper matrix composite
22nd International Scientific Conference on Achievements in Mechanical and Materials Engineering , , 2015 M30 | M33 |
2015 | Јована Ружић, K. Jakimovska, N. Stoimenov, S. Gyoshev, D. Karastoyanov |
Odobren
|
|
| 32 |
Investigation of Milling Processes in High Energy Mill (ATTRITOR)
XXV International Scientific and Technical Conference (ADP-2016) , Sozopol, Bugarska , 2016 M30 | M33 |
2016 | N. Stoimenov, J. Ruzic |
Odobren
|
|
| 33 |
Nano-indentation Measurement for Heat Resistant Alloys at Elevated Temperatures in Inert Atmosphere
International Conference on Advanced Technology of Experimental Mechanics (ATEM'19) , , 2019 M30 | M33 |
2019 | Ikumu Watanabe, Jovana Ruzic, Kenta Goto, Takahito Ohmura |
Odobren
|
|
| 34 |
Static and kinetic friction of electroless Ni composite coatings
22nd International Scientific Conference on Achievements in Mechanical and Materials Engineering , , 2015 M30 | M33 |
2015 | Александар Венцл, Јакимовска К., Иванова Б., Ружић Ј., Симеонов С., Кандева М. |
Odobren
|
|
| 35 |
The Influence of Synthesis Parameters on Structural and Mechanical Properties of Cu-ZrB2 Alloy
1st Metallurgical & Materials Engineering Congress of South – East Europe (MME SEE 2013), Србија, 23. - 25. Maj, 2013 , , 2013 M30 | M33 |
2013 | Јована Ружић, Душан Божић, Јелена Сташић, В. Рајковић, Карло Раић |
Odobren
|
|
| 36 |
Analysis of Relationship between Properties of Mechanically Alloyed Powders and Corresponding Process Parameters
148th Annual Meeting & Exhibition (TMS 2019), 10-14/03/2019 , San Antonio, Texas, USA , 2019 M30 | M34 |
2019 | Jovana Ružić, Nikolay Stoimenov, Stanislav Gyoshev, Dimitar Karastoyanov |
Odobren
|
|
| 37 |
ANALYSIS OF THE INFLUENCE OF VGS STRUCTURE ON MECHANICAL PROPERTIES OF Ti-12Mo ALLOY
3rd Metallurgical & Materials Engineering Congress of South-East Europe , , 2017 M30 | M34 |
2017 | Jovana Ruzic, Satoshi Emura, Ikumu Watanabe, Takahito Ohmura |
Odobren
|
|
| 38 |
Effect of mechanical alloying time on cavitation erosion behavior of copper matrix composites hardened with various percentages of ZrB2 particles
3rd Metallurgical & Materials Engineering Congress of South-East Europe, Београд, Србија, 1. - 3. Jun, 2017 , , 2017 M30 | M34 |
2017 | Ј. Ружић, М. Дојчиновић, Д. Божић, Ј. Сташић, Т. Волков-Хусовић |
Odobren
|
|
| 39 |
Investigation of mechanical and electrical properties of Cu-based composites reinforced with micro and nano ZrB2 particles
The Second regional round table: Refractory, Process industry and Nanotechnology, ROSOV PIN 2014, Fruška Gora, Srbija, 23. - 24. Okt, 2014 , , 2014 M30 | M34 |
2014 | Јована Ружић, Јелена Сташић, Давор Антанасијевић, Карло Раић, Душан Божић |
Odobren
|
|
| 40 |
Investigation of metal powders using x-ray computed tomography
4rd Metallurgical & Materials Engineering Congress of South-East Europe, the Book of abstracts, 05-07/06/2019 , Beograd, Srbija , 2019 M30 | M34 |
2019 | Jovana Ružić, Stanisla Gyoshev, Nikolay Stoimenov, Dimitar Karastoyanov |
Odobren
|
|
| 41 |
INVESTIGATION OF THE Mo DISTRIBUTION THROUGH THE LARGE Β-PHASE GRAINS AND ITS INFLUENCE ON ELASTIC MODULUS OF Ti-12Mo ALLOY BY NANOINDENTATION TEST
4th Conference of The Serbian Society for Ceramic Materials , , 2017 M30 | M34 |
2017 | Jovana Ruzic, Satoshi Emura, Ikumu Watanabe, Takahito Ohmura |
Odobren
|
|
| 42 |
Mechanical properties of porous ceramic monoliths based on diatomite
3rd Conference of the Serbian Society for Ceramic Materials , , 2015 M30 | M34 |
2015 | М. Кокунешоски, Ј. Мајсторовић, Ј. Ружић, Б. Матовић, С. Илић, А. Егеља, А. Шапоњић |
Odobren
|
|
| 43 |
Polymer and mechanical characteristics of bulk-fill, low-shrinkage and hybrid composites
CED-IADR/NOF Oral Health Research Congress , / , 2017 M30 | M34 |
2017 | В. Милетић, Д. Перић, J. Stašić, С. Левић, Ј. Ружић |
Odobren
|
|
| 44 |
Safe trapping of Cs radionuclides in thermally treated matrix of natural zeolite –clinoptilolite
3rd Conference of the Serbian Society for Ceramic Materials , / , 2015 M30 | M34 |
2015 | Миа Омерашевић, Урош Јовановић, Весна Максимовић, Миљана Мирковић, Мариа Чебела, Јована Ружић, Никола Вуковић |
Odobren
|
|
| 45 |
The influence of boron on synthesis and characteristics of PM copper-zirconium alloys
YUCOMAT 2018, Херцег Нови, Црна Гора, 3. - 7. Sep, 2018 , , 2018 M30 | M34 |
2018 | Душан Божић, Јелена Сташић, Јована Ружић |
Odobren
|
|
| 46 |
Transformation of Cs-LTA type of zeolite to pollucite phase using hot pressing method
Fourth Conference of the Serbian Society for Ceramic Materials, , , 2017 M30 | M34 |
2017 | Mia Omerašević, Jovana Ružić, Jovana Orlić, Zvezdana Baščarević, Marjetka Savić Biserčić, Ljiljana Matović |
Odobren
|
|
| 47 |
Influence of the fabrication process of copper matrix composites on cavitation erosion resistance
Metallurgical and Materials Engineering , , 2017 M50 | M51 |
2017 | J. Ružić, J. Stašić, D. Božić, M. Dojčinović, T. Volkov-Husović |
Odobren
|
|
| 48 |
Prediction of hardness and electrical properties in ZrB2 particle reinforced metal matrix composites using artificial neural network
Metallurgical and Materials Engineering , , 2014 M50 | M51 |
2014 | J. Ružić, D. Antanasijević, D. Božić, K. Raić |
Odobren
|
|
| 49 |
Understanding plasma spraying process and characteristics of DC-arc plasma gun (PJ-100)
Metallurgical and Materials Engineering , , 2012 M50 | M52 |
2012 | J. Ružić, M. Vilotijević, D. Božić, K. Raić |
Odobren
|
|
| 50 |
Dobijanje nanokompozita sa osnovom od legure cinka ZA-27 uz dodatak nanočestica SiC ili Al2O3 kombinacijom mehaničkog legiranja i kompokasting postupka
Dobijanje nanokompozita sa osnovom od legure cinka ZA-27 uz dodatak nanočestica SiC ili Al2O3 kombinacijom mehaničkog legiranja i kompokasting postupka , / , 2016 M80 | M82 |
2016 | Биљана Бобић, Александар Венцл, Мирослав Бабић, Ј. Ружић, Б. Јегдић, Илија Бобић |
Odobren
|
|
| 51 |
The influence of boron addition on properties of copper-zirconium alloys
Science of Sintering , , 2023 M20 | M22 |
2023 | M. Simić, J. Ružić, D. Božić, N. Stoymenov, S. Goshev, D. Karastoyanov, J. Stašić |
Odobren
|
|
| 52 |
Influence of the milling time on the structural parameters of Cu-Zr-B alloys
5th Metallurgical & Materials Engineering Congress of South-East Europe , Trebinje, BIH , 2023 M30 | M33 |
2023 | M. Simić, J. Ružić, J. Erčić, D. Božić, Ž. Radovanović, J. Stašić |
Odobren
|
|
| 53 |
Predicting Low-Modulus Biocompatible Titanium Alloys Using Machine Learning
Materials , , 2023 M20 | M21 |
2023 | Gordana Marković, Vaso Manojlović, Jovana Ružić, Miroslav Sokić |
Odobren
|
|
| 54 |
The effect of mechanical alloying parameters on the copper matrix composite materials
9th Conference of Young Chemists of Serbia , Novi Sad , 2023 M30 | M34 |
2023 | Marko Simić, Jovana Ružić, Emilija Nidžović, Jelena Stašić |
Odobren
|
|
| 55 |
The Effect of Ball-Powder Ratio on The Mechanical and Structural Properties of CuZrB Composite Materials Fabricated by Powder Metallurgy
Metallurgical and Materials Data , Beograd , 2023 M50 | M54 |
2023 | Marko Simić, Jovana Ružić, Dušan Božić, Jelena Stašić |
Odobren
|
|
| 56 |
STUDY OF THE CHANGES IN MECHANICAL PROPERTIES OF THE COPPER-ZIRCONIUM ALLOYS INFLUENCED BY MINOR BORON ADDITION
5th Metallurgical & Materials Engineering Congress of South-East Europe 2023 – Trebinje, BIH , Trebinje , 2023 M30 | M33 |
2023 | Jovana Ružić, Marko Simić, Dušan Božić, Nikolay Stoimenov, Stanislav Goshev, Jelena Stašić |
Odobren
|
|
| 57 |
Analysis of the change in structural parameters of mechanically alloyed Cu composite materials using different milling methods
21st Young Researchers' Conference Materials Science and Engineering , Beograd , 2023 M30 | M34 |
2023 | Marko Simić, Emilija Nidžović, Željko Radovanović, Jovana Ružić |
Odobren
|
|
| 58 |
Interaction of ns laser with 316L-NiB stainless steel obtained by powder metallurgy - morphological effects and LIBS analysis
IX International School and Conference on Photonics PHOTONICA 2023 , , 2023 M30 | M34 |
2023 | Jelena Stašić, Milan Trtica, Miroslav Kuzmanović, Jelena Savović, Jovana Ružić, Marko Simić, Xizhang Chen , Dušan Božić |
Odobren
|
|
| 59 |
Surface effects induced by short-pulsed lasers on PM-synthesized CuCrZr alloy
5th Metallurgical & Materials Engineering Congress of South-East Europe 2023 - MME SEE 2023 , , 2023 M30 | M34 |
2023 | Jelena Stašić, Milan Trtica, Jovana Ružić, Marko Simić, Andrijana Žekić, Dušan Božić |
Odobren
|
|
| 60 |
Alginate Cryogels as a Template for the Preparation of Edible Oleogels
Foods , , 2024 M20 | M21 |
2024 | Sladjana Meseldzija, Jovana Ruzic, Jelena Spasojevic, Milan Momcilovic, Arash Moeini, Gustavo Cabrera-Barjas, Aleksandra Nesic |
Odobren
|
|
| 61 |
Isplativa proizvodnja legure CuCrZr primenom metalurgije praha | Cost Effective Production of CuCrZr Alloy using Powder Metallurgy
Procesing '24, 37. Medjunarodni kongres o procesnoj industriji , Beograd , 2024 M30 | M33 |
2024 | Marko Simić, Jelena Stašić, Dušan Božić, Andrijana Zekić, Milica Milojević, Jovana Ružić |
Odobren
|
|
| 62 |
Application of powder metallurgy in the production of the copper-based material
25th YUCOMAT 2024 & XIII WRTCS , Herceg Novi, Montenegro , 2024 M30 | M34 |
2024 | Marko Simić, Emilija Nidžović, Vladimir Pavkov, Jelena Stašić, Jovana Ružić |
Odobren
|
|
| 63 |
Експонат - Увид у расподелу пора на површини пилот филтера од глине
Каталог изложбе под називом: " Играј за човечанство! Наука за све. Закорачи у одрживу будућност" , Beograd , 2024 M100 | M105 |
2024 | Маја Кокунешоски, Јована Ружић |
Odobren
|
|
| 64 |
FILTERS DEVELOPMENT FOR THE PURIFICATION OF INDUSTRIAL WATER OF CLAY MINERALS
8th WORKSHOP: FOOD AND DRUG SAFETY AND QUALITY , Beograd , 2024 M30 | M33 |
2024 | Maja Kokunešoski, Jovana Ružić |
Odobren
|
|
| 65 |
Mechanical Properties of Mullite Investigated by Nanoindentation
Metallurgical and Materials Data , , 2024 M50 | M54 |
2024 | Jovana Ružić, Jelena Maletaškić, Željko Radovanović, Svetlana Ilić |
Odobren
|
|
| 66 |
Prediction of elastic modulus, yield strength, and tensile strength in biocompatible titanium alloys
Journal of Mining and Metallurgy, Section B: Metallurgy , , 2024 M20 | M23 |
2024 | G. Markovic, J. Ruzic, M. Sokic, D. Milojkov, V.D. Manojlovic |
Odobren
|
|
| 67 |
Mechanical alloying as a crucial step in the fabrication process of Cu alloys
IMEC2024-2nd International Conference on Innovative Materials in Extreme Conditions: Book of abstracts , Beograd , 2024 M30 | M34 |
2024 | Marko Simić, Jovana Ružić, Dušan Božić, Željko Radovanović, Jelena Stašić |
Odobren
|
|
| 68 |
Modified Testing Protocol for Texture Analysis of Alginate Cryogel Material
Metallurgical and Materials Data , , 2024 M50 | M54 |
2024 | Jovana Ruzic, Aleksandra Nesic, Sladjana Meseldzija, Jelena Spasojevic |
Odobren
|