Profil

Avatar

Ivana Cvijović-Alagić

Zvanje:
Naučni savetnik
Direktni telefoni:
+381-11-3408-606
Lokal:
1606
Naučna oblast:
1
Veće oblasti:
Materijali,
Orcid broj:
0000-0002-3554-4003
Organizaciona jedinica:
170

DIPLOME

ZVANJA

M faktor

Kategorija Broj Koeficijent Ukupno

Ukupno M faktor:

0
--> -->--> -->--> --> --> -->--> -->--> --> -->-->

NI radovi

# Naziv, Datum, Grupa, Vrsta Godina Autori Status
1 Chapter 10: Microstructure and Mechanical Properties of Investment Cast Ti-6Al-4V and γ-TiAl Alloys
Titanium Alloys: Preparation, Properties and Applications, Editor: Pedro N. Sanchez, Nova Science Publishers Inc , NY , 2010
M10 | M13 		2010 Milan T. Jovanović, Ivana Cvijović-Alagić
Odobren
2 Chapter 5: Gas Corrosion Degradation Mechanism in Low Carbon Steels
Corrosion Research Trends, Editor: I. S. Wang, Nova Science Publishers Inc , NY , 2007
M10 | M13 		2007 I. Cvijović, Z. Cvijović, M. Spiegel
Odobren
3 Boron ions irradiation induced structural and surface modification of glassy carbon
Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 316 (2013) 17-21 , Nuclear Science & Technology (7/34) M21 , 2013
M20 | M21 		2013 A. Kalijadis, Z. Jovanović, I. Cvijović-Alagić, Z. Laušević
Odobren
4 Damage behavior of orthopedic titanium alloys with martensitic microstructure during sliding wear in physiological solution
International Journal of Damage Mechanics, 28 (8) (2019) 1228-1247. , Mechanics (31/136) , 2019
M20 | M21 		2019 I. Cvijović-Alagić, Z. Cvijović, M. Rakin
Odobren
5 Damage of Ti-Stabilized Interstitial Free Steel by Gas Corrosion
Kovove Materialy-Metallic Materials, 46 (5) (2008) 297 - 300 , Metallurgy & Metallurgical Engineering (9/66) , 2008
M20 | M21 		2008 I. Cvijović-Alagić, M. Spiegel, I. Parezanović
Odobren
6 Ductile fracture of pipe-ring notched bend specimens - micromechanical analysis
Engineering Fracture Mechanics, 175 (2017) 247-261 , Mechanics (28/134) , 2017
M20 | M21 		2017 W. Musraty, B. Međo, N. Gubeljak, A. Likeb, I. Cvijović-Alagić, A. Sedmak, M. Rakin
Odobren
7 Effect of alloy purity on fracture behaviour of overaged 7000 alloy plates
International Journal of Damage Mechanics, 20 (2011) 179-193 , Mechanics (16/133) , 2011
M20 | M21 		2011 Z. Cvijović, M. Vratnica, I. Cvijović-Alagić
Odobren
8 Effects of a low shrinkage methacrylate monomer and monoacylphosphine oxide photoinitiator on curing efficiency and mechanical properties of experimental resin-based composites
Materials Science and Engineering. C: Materials for Biological Applications, 58 (2016) 487-494 , Materials Science, Biomaterials (9/33) , 2016
M20 | M21 		2016 D. Manojlović, M. Dramićanin, M. Milošević, I. Zeković, I. Cvijović-Alagić, N. Mitrović, V. Miletić
Odobren
9 Electrochemical and biocompatibility examinations of high pressure torsion processed titanium and Ti-13Nb-13Zr alloy
Journal of Biomedical Materials Research. Part B: Applied Biomaterials, 106B (2018) 1097-1107 , Engineering, Biomedical (17/78) , 2018
M20 | M21 		2018 I. Dimić, I. Cvijović-Alagić, A. Hohenwarter, R. Pippan, V. Kojić, J. Bajat, M. Rakin
Odobren
10 Electrochemical behaviour of Ti-6Al-4V alloy with different microstructures in a simulated bio-environment
Materials and Corrosion (Werkstoffe und Korrosion), 67(10) (2016) 1075-1087 , Metallurgy & Metallurgical Engineering (21/73) , 2016
M20 | M21 		2016 I. Cvijović-Alagić, Z. Cvijović, J. Bajat, M. Rakin
Odobren
11 Fabrication and characterization of high entropy pyrochlore ceramics
Boletin de La Sociedad Espanola de Ceramica Y Vidrio , , 2023
M20 | M21 		2023 B. Matović, D. Zagorac, I. Cvijović-Alagić, J. Zagorac, S. Butulija, J. Erčić, O. Hanzel, R. Sedlák, M. Lisnichuk, P. Tatarko
Odobren
12 Grain refinement effect on the Ti-45Nb alloy electrochemical behavior in simulated physiological solution
Surface and Coatings Technology , Surface and Coatings Technology , 2021
M20 | M21 		2021 I. Cvijović-Alagić, S. Laketić, J. Bajat, A. Hohenwarter, M. Rakin
Odobren
13 Laser-Induced Plasma as a Method for the Metallic Materials Hardness Estimation: An Alternative Approach
Plasma Chemistry and Plasma Processing , , 2020
M20 | M21 		2020 M. Momčilović, J. Petrovic, J. Ciganović, I. Cvijović-Alagić, F. Koldzić, S. Živković
Odobren
14 Microstructural dependence of fracture toughness in high-strength 7000 forging alloys
Engineering Fracture Mechanics, 75 (8) (2008) 2115-2129 , Mechanics (24/112) , 2008
M20 | M21 		2008 Z. Cvijović, M. Rakin, M. Vratnica, I. Cvijović
Odobren
15 Microstructural morphology effects on fracture resistance and crack tip strain distribution in Ti-6Al-4V alloy for orthopedic implants
Materials and Design, 53 (2014) 870-880 , Materials Science, Multidisciplinary (43/260) , 2014
M20 | M21 		2014 I. Cvijović-Alagić; N. Gubeljak, M. Rakin, Z. Cvijović, K. Gerić
Odobren
16 Microstructure and metallic ion release of pure titanium and Ti-13Nb-13Zr alloy processed by high pressure torsion
Materials and Design, 91 (2016) 340-347 , Materials Science, Multidisciplinary (46/275) , 2016
M20 | M21 		2016 I. Dimić, I. Cvijović-Alagić, B. Völker, A. Hohenwarter, R. Pippan, Đ. Veljović, M. Rakin, B. Bugarski
Odobren
17 Multilayer aluminum composites prepared by rolling of pure and anodized aluminum foils
Transactions of Nonferrous Metals Society of China (English Edition) , , 2017
M20 | M21 		2017 M.T. Jovanović, N. Ilić, I. Cvijović-Alagić, V. Maksimović, S. Zec
Odobren
18 Sr,Mg co-doping of calcium hydroxyapatite: Hydrothermal synthesis, processing, characterization and possible application as dentin substitutes
Ceramics International , , 2022
M20 | M21 		2022 T. Matić, M. Ležaja Zebić, V. Miletić, I. Cvijović-Alagić, R. Petrović, Dj. Janaćković, Dj. Veljović
Odobren
19 Surface modifications of biometallic CP-Ti and Ti-13Nb-13Zr alloy by picosecond Nd:YAG laser
International Journal of Minerals, Metallurgy and Materials , , 2021
M20 | M21 		2021 S. Laketić, M. Rakin, M. Momčilović, J. Ciganović, Đ. Veljović, I. Cvijović-Alagić
Odobren
20 Tensile and Corrosion Properties of Anodized Ultrafine-Grained Ti-13Nb-13Zr Biomedical Alloy Obtained by High-Pressure Torsion
Metals and Materials International , Metals and Materials International , 2021
M20 | M21 		2021 D. Barjaktarević, B. Medjo, P. Štefane, N. Gubeljak, I. Cvijović-Alagić, V. Djokić, M. Rakin
Odobren
21 The combination of precipitation and dispersion hardening in powder metallurgy produced Cu-Ti-Si alloy
Materials Characterization, 59 (8) (2008) 1122-1126 , Materials Science, Characterization & Testing (4/28) , 2008
M20 | M21 		2008 D. Božić, O. Dimčić, B. Dimčić, I. Cvijović, V. Rajković
Odobren
22 The effect of DP steel surface roughness on selective oxidation and surface wettability
Kovove Materialy-Metallic Materials, 44 (1) (2006) 35-39 , Metallurgy & Metallurgical Engineering (12/65) , 2006
M20 | M21 		2006 I. Cvijović, M. Spiegel, I. Parezanović
Odobren
23 The effect of processing techniques on microstructural and tribological properties of copper-based alloys
Applied Surface Science, 280 (2013) 646-654 , Materials Science, Coatings & Films (2/18) M21 , 2013
M20 | M21 		2013 A. Vencl, V. Rajković, F. Živić, S. Mitrović, I. Cvijović-Alagić, M.T. Jovanović
Odobren
24 The influence of the surface nanostructured modification on the corrosion resistance of the ultrafine-grained Ti-13Nb-13Zr alloy in artificial saliva
Theoretical and Applied Fracture Mechanics, 103 (2019) 102307 , Engineering, Mechanical (33/129) Mechanics (31/134) , 2019
M20 | M21 		2019 D.R. Barjaktarević, V.R. Djokić, J.B. Bajat, I.D. Dimić, I.Lj. Cvijović-Alagić, M.P. Rakin
Odobren
25 The recasting effects on the high gold dental alloy properties
Journal of Mining and Metallurgy, Section B: Metallurgy , / , 2015
M20 | M21 		2015 Весна Максимовић, Александра Д. Чаировић, Јелена Пантић, И. Цвијовић Алагић
Odobren
26 Tribological Behaviour of Orthopaedic Ti-13Nb-13Zr and Ti-6Al-4V Alloys
Tribology Letters, 40 (1) (2010) 59-70 , Engineering, Mechanical (16/116) , 2010
M20 | M21 		2010 I. Cvijović-Alagić, Z. Cvijović, S. Mitrović, M. Rakin, Đ. Veljović, M. Babić
Odobren
27 Characterization of B4C-SiC ceramic composites prepared by ultra-high pressure sintering
Journal of the European Ceramic Society , , 2021
M20 | M21a 		2021 Matović B., Maletaškić J., Prikhna T., Urbanovich V., Girman V., Lisnichuk M., Todorović B., Yoshida K., Cvijović-Alagić I.
Odobren
28 Composition and processing effects on the electrochemical characteristics of biomedical titanium alloys
Corrosion Science , Metallurgy & Metallurgical Engineering (2/74) , 2014
M20 | M21a 		2014 I. Cvijović-Alagić, Z. Cvijović, J. Bajat, M. Rakin
Odobren
29 Cyclic oxidation behaviour of Ti3Al-based alloy with Ni–Cr protective layer
Corrosion Science , Metallurgy & Metallurgical Engineering (3/63) , 2008
M20 | M21a 		2008 I. Cvijović, M.T. Jovanović, D. Peruško
Odobren
30 Cyclic oxidation of Ti3Al-based materials
CERAMICS INTERNATIONAL , , 2019
M20 | M21a 		2019 I. Cvijović-Alagić, Z. Cvijović, D. Zagorac*, M.T. Jovanović
Odobren
31 Fracture micromechanisms in overaged 7000 alloy forgings
Journal of Alloys and Compounds , Metallurgy & Metallurgical Engineering (6/66) , 2007
M20 | M21a 		2007 Z. Cvijović, I. Cvijović, M. Vratnica
Odobren
32 Influence of H2–N2 atmosphere composition and annealing duration on the selective surface oxidation of low-carbon steels
Corrosion Science , Metallurgy & Metallurgical Engineering (4/67) , 2006
M20 | M21a 		2006 I. Cvijović, I. Parezanović, M. Spiegel
Odobren
33 Initial microstructure effect on the mechanical properties of Ti-6Al-4V ELI alloy processed by high-pressure torsion
Material Science and Engineering A , Metallurgy & Metallurgical Engineering (7/75) , 2018
M20 | M21a 		2018 I. Cvijović-Alagić, Z. Cvijović, J. Maletaškić, M. Rakin
Odobren
34 Micromechanical Model for Fracture Toughness Prediction in Al-Zn-Mg-Cu Alloy Forgings
Philosophical Magazine , Metallurgy & Metallurgical Engineering (5/66) , 2008
M20 | M21a 		2008 Z. Cvijović, M. Vratnica, M. Rakin, I. Cvijović-Alagić
Odobren
35 Microstructural study of Ti-45Nb alloy before and after HPT processing using experimental and ab initio data mining approach
MATERIALS CHARACTERIZATION , , 2020
M20 | M21a 		2020 I. Cvijović-Alagić, M. Rakin, S. Laketić, D. Zagorac*
Dupli unos, za brisanje
36 Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution
Corrosion Science , Metallurgy & Metallurgical Engineering (2/75) , 2011
M20 | M21a 		2011 I. Cvijović-Alagić, Z. Cvijović, S. Mitrović, V. Panić, M. Rakin
Odobren
37 An original LIBS system based on TEA CO2 laser as a tool for determination of glass surface hardness
Appl. Phys. B , , 2019
M20 | M22 		2019 Momčilović M, Živković S, Petrović J, Cvijović-Alagic I, Ciganović J
Odobren
38 Carbon cryogel preparation and characterization
Diamond and Related Materials , , 2022
M20 | M22 		2022 B. Matović, Yu.E. Gorshkova, S.Yu. Kottsov, G.P. Kopitsa, S. Butulija, T. Minović Arsić, I. Cvijović-Alagić
Odobren
39 Densification of boron carbide under high pressure
Materials Letters , , 2022
M20 | M22 		2022 B. Matović, V. Urbanovich, V. Girman, M. Lisnichuk, D. Nikolić, J. Erčić, I. Cvijović-Alagić
Odobren
40 Effect of hydroxyapatite spheres, whiskers, and nanoparticles on mechanical properties of a model BisGMA/TEGDMA composite initially and after storage
Journal of Biomedical Materials Research. Part B: Applied Biomaterials, 101(8) (2013) 1469-1476 , Engineering, Biomedical (27/76) M22 , 2013
M20 | M22 		2013 M. Ležaja, Đ.N. Veljović, B.M. Jokić, I. Cvijović-Alagić, M.M. Zrilić, V.Miletić
Odobren
41 High-density ceramics obtained by andesite basalt sintering
Processing and Application of Ceramics , , 2022
M20 | M22 		2022 Vladimir Pavkov, Gordana Bakic, Vesna Maksimovic, Ivana Cvijovic-Alagic, Marija Prekajski-Ðordjevic, Dusan Bucevac, Branko Matovic
Odobren
42 In-situ processing of TiB2 nanoparticle-reinforced copper matrix composites
Science of sintering , , 2009
M20 | M22 		2009 D. Bozic, I. Cvijovic-Alagic, B. Dimcic, J. Stasic, V. Rajkovic
Odobren
43 Mechanical and Fracture behavior of Powder Metalurgy Processed Ti3Al-based Alloys
Journal of Materials Science, 41 (13) (2006) 4307-4313 , Materials Science, Multidisciplinary (87/175) , 2006
M20 | M22 		2006 B. Dimčić, I. Cvijović, D. Božic, M.T. Jovanović, O. Dimčić
Odobren
44 The effect of Ni-Cr protective layer on cyclic oxidation of Ti3Al
Journal of Microscopy - Oxford, 224 (2006) 68–71 , Microscopy (4/9) , 2006
M20 | M22 		2006 I. Cvijović, M.T. Jovanović, D. Vasiljević-Radović and D. Peruško
Odobren
45 Corrosion Resistance of High Pressure Torsion Obtained Commercially Pure Titanium in Acidic Solution
Tehnički vjesnik/Technical Gazette, 24 (6) (2017) 1689-1695. doi: 10.17559/TV-20160303141534 , Engineering, Multidisciplinary (61/85) , 2017
M20 | M23 		2017 D.R. Barjaktarević, I.D. Dimić, I.Lj. Cvijović-Alagić, Đ.N. Veljović, M.P. Rakin
Odobren
46 In vitro biocompatibility assessment of Co-Cr-Mo dental cast alloy
Journal of the Serbian Chemical Society, 80 (12) (2015) 1541-1552. doi: 10.2298/JSC150505070M , Chemistry, Multidisciplinary (120/163) , 2015
M20 | M23 		2015 I. Dimić, I. Cvijović-Alagić, N. Obradović, J. Petrović, S. Putić, M. Rakin, B. Bugarski
Odobren
47 Metallic Ion Release from Biocompatible Cobalt-Based Alloy
Chemical Industry and Chemical Engineering Quarterly – CICEQ, 20 (4) (2014) 571-577 , Engineering, Chemical (89/135) , 2014
M20 | M23 		2014 I. Dimić, I. Cvijović-Alagić, I. Kostić, A. Perić-Grujić, M. Rakin, S. Putić, B. Bugarski
Odobren
48 Micromechanical Analysis of Constraint Effect on Fracture Initiation in Strength Mismatched Welded Joints
Materials Science Forum, 555 (2007) 571-576 , Materials Science, Multidisciplinary (137/178) , 2007
M20 | M23 		2007 M. Dobrojević, M. Rakin, N. Gubeljak, I. Cvijović, M. Zrilić, N. Krunich, A. Sedmak
Odobren
49 Recasting as a booster of Ag-Pd alloy cytotoxicity: Induction of cell senescence prior to mass cell death
Archives of Biological Sciences , , 2019
M20 | M23 		2019 A.D. Čairović, D.M. Stanimirović, T.T. Krajnović, B.P. Dojčinović, V.M. Maksimović, I.L. Cvijović-Alagić
Odobren
50 The Influence of Microstructural Characteristics on the Mechanical Properties of Ti6Al4V Alloy Produced by Powder Metallurgy Technique
Journal of the Serbian Chemical Society, 71 (8-9) (2006) 985–992 , Chemistry, Multidisciplinary (85/124) , 2006
M20 | M23 		2006 D. Božić, I. Cvijović, M. Vilotijević, M. T. Jovanović
Odobren
51 Wear Behaviour of Ti6Al4V Alloy against Al2O3 under Linear Reciprocating Sliding
Journal of the Balkan Tribological Association, 17 (1) (2011) 27-36 , Engineering, Mechanical (114/122) , 2011
M20 | M23 		2011 F. Živić, M. Babić, I. Cvijović-Alagić, S. Mitrović, A.Vencl
Odobren
52 Anodization of Ti-based materials for biomedical applications: A review
Metallurgical and Materials Engineering, 22 (3) (2016) 129-144 , , 2016
M20 | M24 		2016 D.R. Barjaktarević, I.Lj. Cvijović-Alagić, I.D. Dimić, V.R. Đokić, M.P. Rakin,
Odobren
53 Arc Plasma Deposition of TiO2 Nanoparticles from Colloidal Solution
Metallurgical and Materials Engineering , , 2020
M20 | M24 		2020 V. Maksimović, M. Stoiljković, V. Pavkov, J. Ciganović, I. Cvijović-Alagić
Odobren
54 Copper Alloys with Improved Properties: Standard Ingot Metallurgy vs. Powder Metallurgy
Metallurgical and Materials Engineering, 20 (3) (2014) 207-216 , , 2014
M20 | M24 		2014 M.T. Jovanović, V. Rajković, I. Cvijović-Alagić
Odobren
55 Effect of Artificial Saliva pH Value on Ion Release from Commercially Pure Titanium
Acta Periodica Technologica, 44 (2013) 207-215 , , 2013
M20 | M24 		2013 I.D. Dimić, I.Lj. Cvijović-Alagić, M.B. Rakin, A.A. Perić-Grujić, M.P. Rakin, B.M. Bugarski, S.S. Putić
Odobren
56 FAILURE ANALYSIS OF JET ENGINE TURBINE BLADE
Metallurgical and Materials Engineering , , 2016
M20 | M24 		2016 M.T. Jovanovic, V. Maksimovic, I. Cvijovic-Alagic
Odobren
57 Fractographic analysis of the aluminum matrix composite prepared by accumulative roll bonding
Metallurgical and Materials Engineering , , 2020
M20 | M24 		2020 I. Cvijović-Alagić, V. Maksimović, M.T. Jovanović
Odobren
58 Optical microscopy as a simple method for analysis of boiler tube failure
Metallurgical and Materials Engineering , , 2019
M20 | M24 		2019 M.T. Jovanovic, Z. Miskovic, V. Maksimovic, I. Cvijovic-Alagic
Odobren
59 Tensile properties and fracture mechanism of IN-100 superalloy in high temperature range
Metallurgical and Materials Engineering , , 2017
M20 | M24 		2017 M.T. Jovanović, Đ. Drobnjak, I. Cvijović-Alagić, V. Maksimović
Odobren
60 The Effect of Calcinated Hydroxyapatite and Magnesium Doped Hydroxyapatite as Fillers on the Mechanical Properties of a Model BisGMA/TEGDMA Dental Composite Initially and After Aging
Metallurgical and Materials Engineering, 24 (4) (2018) 271-281 , , 2018
M20 | M24 		2018 T. Matić, M. Ležaja Zebić, I. Cvijović-Alagić, V. Miletić, R. Petrović, Dj. Janaćković, Dj. Veljović
Odobren
61 Metallurgical and Materials Engineering: Milan T. Jovanović – Memorial Issue, vol. 26, No. 4 (2020)
Metallurgical and Materials Engineering , , 2020
M20 | M29a 		2020 I. Cvijović-Alagić, V. Maksimović (Guest Editors)
Odobren
62 Cyclic oxidation of Ti3Al-based materials
14th International Ceramics Congress (CIMTEC 2018) , Perugia, Italy , 2018
M30 | M32 		2018 I. Cvijović-Alagić, M.T. Jovanović, D. Zagorac, B. Matović, Z. Cvijović
Odobren
63 Fractographic Examination of the Multilayer Aluminum Composites
1st International Conference on New Research and Development in Technical and Natural Science (ICNRDTNS) , Radenci, Slovenia , 2019
M30 | M32 		2019 I. Cvijović-Alagić
Odobren
64 Laser irradiation as an easy-to-apply method for Ti-based implant materials enhancement
1st International Conference on Innovative Materials in Extreme Conditions (IMEC2022) , Belgrade, Serbia , 2022
M30 | M32 		2022 I. Cvijović-Alagić, S. Laketić, M. Momčilović, J. Ciganović, Đ. Veljović, M. Rakin
Odobren
65 Application of Tribometry in Investigations of Biomaterials
11th International Conference on Tribology – SERBIATRIB '09 , Beograd, Srbija , 2009
M30 | M33 		2009 F. Zivić, S. Mitrović, M. Babić, I. Cvijović-Alagić
Odobren
66 Effects of Cyclic Annealing on the Microstructure and Gas Corrosion Damage of Ti3Al-based Alloy
8th Multinational Congress on Microscopy (8MCM) , Prag, Češka Republika , 2007
M30 | M33 		2007 I. Cvijović, D. Vasiljević-Radović
Odobren
67 Fracture Toughness Prediction in 7000 Forging Alloys
First Serbian (26th YU) Congress on Theoretical and Applied Mechanics , Kopaonik, Srbija , 2007
M30 | M33 		2007 Z. Cvijović, M. Rakin, M. Vratnica, I. Cvijović
Odobren
68 Gas Corrosion Damage in Ti-Stabilized Interstitial Free Steel
PHYSICAL CHEMISTRY 2006 , Beograd, Srbija i Crna Gora , 2006
M30 | M33 		2006 I. Cvijović, M. Spiegel, I. Parezanović
Odobren
69 High-Temperature Cyclic Oxidation of Ti3Al-Based Alloy
4th Balkan Conference on Metallurgy , Zlatibor, Srbija i Crna Gora , 2006
M30 | M33 		2006 I. Cvijović, M. T. Jovanović, R. Aleksić
Odobren
70 Influence of the External Scale Cracking on the Ti3Al-Based Alloy Oxidation Kinetics
3rd International Conference on Deformation Processing and Structure of Materials , , 2007
M30 | M33 		2007 I. Cvijović, M.T. Jovanović
Odobren
71 Influence of welded joint geometry on fracture behaviour - micromechanical assessment
4th Serbian (29th Yu) Congress on Theoretical and Applied Mechanics , Vrnjačka Banja, Serbia , 2013
M30 | M33 		2013 B. Međo, M. Rakin, N. Gubeljak, D. Kozak, I. Cvijović-Alagić, A. Sedmak
Odobren
72 Interaction of picosecond Nd:YAG laser irradiation with Ti-13Nb-13Zr alloy surface in air and argon atmosphere
14th Multinacional Congress on Microscopy (MCM2019) , Belgrade, Serbia , 2019
M30 | M33 		2019 S. Laketić, M. Rakin, M. Momčilović, J. Ciganović, Đ. Veljović, I. Cvijović-Alagić
Odobren
73 Microstructural Changes in Ti3Al-Based Alloy During Cyclic Oxidation
3rd Serbian Congress for Microscopy , Beograd, Srbija , 2007
M30 | M33 		2007 I. Cvijović, M.T. Jovanović
Odobren
74 Microstructural Effects on the Mechanical Properties and Tribological Damage of Ti-6Al-4V Alloy
International Conference on Damage Mechanics (ICDM 2012) , Belgrade, Serbia , 2012
M30 | M33 		2012 I. Cvijović-Alagić, M. Rakin, Z. Cvijović, N. Gubeljak, K. Gerić
Odobren
75 The effect of recasting on structure and microhardness of high gold dental alloy
MCM 2011 – 10th Multinational Congress on Microscopy , Urbino, Italy , 2011
M30 | M33 		2011 V.M. Maksimović, A.D. Čairović, I.Cvijović-Alagić
Odobren
76 The Electrochemical Impedance Spectroscopy Study of Ultrafine-Grained Titanium in Artificial Saliva
TEAM (Technique, Education, Agriculture and Management) 2015 , Belgrade, Serbia , 2015
M30 | M33 		2015 D. Barjaktarević, I. Dimić, I. Cvijović-Alagić, J. Bajat, M. Rakin
Odobren
77 The Influence of Surface Roughness on the Selective Oxidation and Surface Wettability of Dual Phase Steel
2nd International Conference on Deformation Processing and Structure of Materials , Belgrade, Serbia and Montenegro , 2005
M30 | M33 		2005 I. Cvijović, M. Spiegel, I. Parezanović
Odobren
78 An alternative method for determination of hardness based on LIBS
EGAS52 Virtual Conference, organized by the EGAS Board and the Institute of Physics in Zagreb, Croatia , Zagreb, Croatia, July 06-08, 2021 , 2021
M30 | M34 		2021 J. Petrovic, S. Zivkovic, M. Radenkovic, J. Ciganovic, I. Cvijovic Alagic, M. Momcilovic
Odobren
79 Change of the Co-Cr Dental Alloy Structure Upon Recasting
VIth International Metallurgical Congress: Metallurgy, Materials, Environment , Ohrid, Republic of Macedonia , 2014
M30 | M34 		2014 V.M. Maksimović, A.D. Čairović, M.M. Stoiljković, I.Lj. Cvijović-Alagić
Odobren
80 Characterization of nanostructured Ti-6Al-4V alloy produced by high-pressure torsion
NanoBelgrade 2012 , Belgrade, Serbia , 2012
M30 | M34 		2012 I. Cvijović-Alagić, M. Rakin, Z. Cvijović, R. Pippan
Odobren
81 Corrosion behavior of nanotubular oxide layer formed on titanium and Ti-13Nb-13Zr alloy processed by high pressure torsion
The Nineteenth Annual Conference of the Materials Research Society of Serbia YUCOMAT 2017 , Herceg Novi, Montenegro , 2017
M30 | M34 		2017 D. Barjaktarević, I. Dimić, I. Cvijović-Alagić, V. Đokić, J. Bajat, M. Rakin
Odobren
82 Corrosive wear degradation of Ti-based implant alloy
7th Regional Symposium on Electrochemistry for South-East Europe RSE-SEE-7 , Split, Croatia , 2019
M30 | M34 		2019 I. Cvijović-Alagić, Z. Cvijović, J. Bajat, M. Rakin
Odobren
83 DFT study of structural stability and mechanical properties: High-Entropy Alloys (HEAs) - Ultra-High Temperature Ceramics (UHTC)
1st International Conference on Innovative Materials in Extreme Conditions (IMEC2022) , Belgrade, Serbia , 2022
M30 | M34 		2022 D. Zagorac, I. Cvijović-Alagić, J. Zagorac, S. Butulija, J. Erčić, O. Hanzel, R. Sedlák, M. Lisnichuk, T. Škundrić, M. Pejić, D. Jovanović, P. Tatarko, B. Matović
Odobren
84 Effect of alloy purity on fracture behaviour of overaged 7000 alloy plates
ICEFA III – Third International Conference on Engineering Failure Analysis , Sitges Nr. Barcelona, Spain , 2008
M30 | M34 		2008 Z. Cvijović, M. Vratnica, I. Cvijović-Alagić
Odobren
85 Fabrication and characterization of high entropy pyrochlore ceramics
23rd YUCOMAT 2022 , Herceg Novi, Montenegro (August 28 - September 02, 2022) , 2022
M30 | M34 		2022 B. Matović , D. Zagorac, I. Cvijović-Alagić, J. Zagorac, S. Butulija, J. Erčić, O. Hanzel, R. Sedlák, M. Lisnichuk, P. Tatarko
Odobren
86 Fractographic analysis of biomedical Ti-based alloys with acicular microstructures
13th Multinational Congress on Microscopy (MCM2017) , Rovinj, Croatia , 2017
M30 | M34 		2017 I. Cvijović-Alagić, Z. Cvijović, N. Gubeljak, M. Rakin
Odobren
87 Fracture mechanics analysis of heterogeneous cylindrical structures using pipe-ring notched bend specimens
Proceedings of the 6th International Congress of Serbian Society of Mechanics , Tara, Srbija , 2017
M30 | M34 		2017 B. Međo, M. Rakin, N. Gubeljak, W. Musraty, A. Likeb, I. Cvijović Alagić, A. Sedmak
Odobren
88 Influence of heat-treatment conditions on crack propagation during impact testing of biomedical Ti-6Al-4V alloy
VIIth International Metallurgical Congress: Metallurgy, Materials, Environment (MME) , Ohrid, Republic of Macedonia , 2016
M30 | M34 		2016 I. Cvijović-Alagić, Z. Cvijović, Z. Burzić, M. Rakin
Odobren
89 Influence of recasting on the structure and properties of Ni-Cr dental alloy
XXII YuCorr , Tara Mountain, Serbia, 13-16 September 2021 , 2021
M30 | M34 		2021 V. Maksimović, A. Čairović, I. Cvijović-Alagić
Odobren
90 Laser Surface Modification of CP-Ti in Differnet Gas Atmospheres
13th Conference for Young Scientists in Ceramics (CYSC-2019) , Novi Sad, Srbia, 16. - 19. Oct, 2019 , 2019
M30 | M34 		2019 .S. Laketić, M. Rakin, M. Momčilović, J. Ciganović, Dj. Veljović, I. Cvijović-Alagić
Odobren
91 Laser-induced chemical and mophological changes of the titanium alloy surface under different irradiation parameters
23rd YUCOMAT 2022 , Herceg Novi, Montenegro (August 28 - September 02, 2022) , 2022
M30 | M34 		2022 S. Laketić, M. Rakin, M. Momčilović, J. Ciganović, Đ. Veljović, I. Cvijović-Alagić
Odobren
92 Mechanical properties of experimental composites with different types of hydroxyapatite fillers
NanoBelgrade 2012 , Belgrade, Serbia , 2012
M30 | M34 		2012 M. Ležaja, Đ. Veljović, B. Jokić, I. Cvijović-Alagić, V. Miletić
Odobren
93 Metal Ion Release From Titanium and Cobalt-Based Alloy for Dental Application
YUCOMAT 2013 , Herceg Novi, Montenegro , 2013
M30 | M34 		2013 I.D. Dimić, N.S. Tomović, I.Lj. Cvijović-Alagić, M.P. Rakin, B.M. Bugarski
Odobren
94 Mg2+/Sr2+ co-doping of calcium hydroxyapatite: The effect on mechanical properties
18th Young Researchers' Conference - Materials Sciences and Engineering (18YRC - 2019) , Belgrade, Serbia , 2019
M30 | M34 		2019 T. Matić, I. Cvijović-Alagić, R. Petrović, Đ. Janaćković, Đ. Veljović
Odobren
95 Microstructural refinement influence on the Ti-45Nb alloy properties in physiological conditions
XXII YuCorr , Tara Mountain, Serbia, 13-16 September 2021 , 2021
M30 | M34 		2021 I. Cvijović-Alagić, S. Laketić, D. Zagorac, J. Bajat, Đ. Veljović, V. Kojić, M. Rakin
Odobren
96 Morphology of Nanotubular Oxide Layer Formation on Titanium and Titanium Alloy Using Electrochemical Anodization
First International Conference on Electron Microscopy of Nanostructures ELMINA 2018 , Belgrade, Serbia , 2018
M30 | M34 		2018 D. Barjaktarević, I. Dimić, I. Cvijović-Alagić, V. Đokić, M. Rakin
Odobren
97 Morphological changes of the biomedical titanium grade induced by laser treatment in air and nitrogen atmosphere
, 18th Young Researchers' Conference - Materials Sciences and Engineering (18YRC - 2019) , Belgrade, Serbia, 4. - 6. Dec, 2019 , 2019
M30 | M34 		2019 S. Laketić, M. Rakin, M. Momčilović, J. Ciganović, I. Cvijović-Alagić
Odobren
98 Nano-Scale Tribological Investigation of Ti-6Al-4V Alloy for Orthopedic Applications
Euro BioMat 2011 - European Symposium on Biomaterials and Related Areas , Jena, Germany , 2011
M30 | M34 		2011 I. Cvijović-Alagić, Z. Cvijović, F. Živić, K. Gerić, M. Rakin
Odobren
99 Nanostructure and phase analysis of spark plasma sintered composite powder of ZrC and -SiC with LIYO2
2nd Conference of the Serbian Ceramic Society , , 2013
M30 | M34 		2013 Lj. Kljajević, S. Nenadović, I. Cvijović-Alagić, M. Prekajski, D. Gautam, A. Devečerski, B. Matović
Odobren
100 Numerical simulation of fracture in Ti-6Al-4V alloy for orthopedic applications
22nd European Conference on Fracture - ECF22 Loading and Environment Effects on Structural Integrity , Belgrade, Serbia , 2018
M30 | M34 		2018 I. Cvijović-Alagić, B. Međo, Z. Cvijović, N. Gubeljak, M. Rakin
Odobren
101 Phase transformations during cyclic annealing of Ti3Al-based intermetallic
6th Conference of The Serbian Society for Ceramic Materials (6CSCS-2022) , Belgrade, Serbia, 28-29 June 2022 , 2022
M30 | M34 		2022 I. Cvijović-Alagić, D. Zagorac
Odobren
102 Physical and mechanical properties of glass-ceramic-metal composite materials after sintering
XXIII YUCORR, 16.05.-19.05.2022. Mountain Divcibare, Serbia , , 2022
M30 | M34 		2022 V. Pavkov, G. Bakic, V. Maksimovic, I. Cvijovic-Alagic, B. Matovic
Odobren
103 Physical properties of a tricalcium silicate-based cement (Biodentine)
IADR/PER 2014 Congress , Dubrovnik, Croatia , 2014
M30 | M34 		2014 T. Savić-Stanković, D. Manojlović, M. Ležaja, I. Cvijović-Alagić, M. Milosević, N. Mitrović, V. Miletić
Odobren
104 Surface Modification of a Titanium Implant Material by a Picosecond Nd:YAG Laser in Air and Argon Atmosphere
4th Metallurgical & Materials Engineering Congress of South-East Europe (MME SEE 2019) , Belgrade, Serbia , 2019
M30 | M34 		2019 S. Laketić, M. Rakin, M. Momčilović, J. Ciganović, Dj. Veljović, I. Cvijović-Alagić
Odobren
105 Surface damage caused by laser irradiation of the Ti45Nb alloy processed by high-pressure torsion
14th EcerS Conference for Young Scientists in Ceramics (CYSC-2021) , Novi Sad, Serbia, 20-23 October 2021 , 2021
M30 | M34 		2021 S. Laketić, M. Rakin, M. Momčilović, J. Ciganović, Đ. Veljović, I. Cvijović-Alagić
Odobren
106 The effect of hydrothermal synthesis parameters on cation-doped calcium hydroxyapatite
The Serbian Ceramic Society Conference - Advanced Ceramics and Application IX , Belgrade, 20-21 September 2021 , 2021
M30 | M34 		2021 T. Matić, I. Cvijović-Alagić, R. Petrović, Đ. Janaćković, Đ. Veljović
Odobren
107 The effect of Ni-Cr protective layer on cyclic oxidation of Ti3Al
XII International Conference on Electron Microscopy of Solids , Kazimierz Dolny, Poland , 2005
M30 | M34 		2005 I. Cvijović, M.T. Jovanović, D. Vasiljević-Radović and D. Peruško
Odobren
108 The Influence of Heat Treatment and Ni-Cr Protective Layer on Ti3Al Cyclic Oxidation
The Seventh Conference of the Yugoslav Materials Research Society YUCOMAT 2005 , Herceg Novi, Serbia and Montenegro , 2005
M30 | M34 		2005 I. Cvijović, M.T. Jovanović, D. Vasiljević-Radović
Odobren
109 Thermo-Mechanical Processing Effect on Tribo-Mechanical Properties of Biomedical Ti-Based Alloy
VIth International Metallurgical Congress: Metallurgy, Materials, Environment , Ohrid, Republic of Macedonia , 2014
M30 | M34 		2014 I. Cvijović-Alagić, Z. Cvijović, M. Rakin
Odobren
110 TiO2 Nanoparticle Deposition on Solid CP-Ti Substrate through Spraying Water Colloid in the Arc Plasma
First International Conference on Electron Microscopy of Nanostructure, Elmina 2018, August 26-29, Belgrade, Serbia , , 2018
M30 | M34 		2018 V. Pavkov, M.M. Stoiljkovic. V.M. Maksimović, I. Cvijović-Alagić, J. Ciganović, M.R. Vranješ
Odobren
111 Titanium Aluminide Cyclic Oxidation Kinetics
XXIII YuCorr , May 16-19, 2022, Divčibare, Serbia , 2022
M30 | M34 		2022 I. Cvijović-Alagić, M.T. Jovanović
Odobren
112 Program and Book of Abstracts of The 1st International Conference on Innovative Materials in Extreme Conditions (IMEC2022)
The 1st International Conference on Innovative Materials in Extreme Conditions (IMEC2022) , , 2022
M30 | M36 		2022 B. Matović, I. Cvijović-Alagić, V. Maksimović
Odobren
113 A model for predicting fracture toughness in overaged 7000 alloy forgings
Metalurgija – Journal of Metallurgy (MJoM) , , 2007
M50 | M51 		2007 M. Vratnica, Z. Cvijović, M. Rakin, I. Cvijović
Odobren
114 Analysis of metal ion release from biomedical implants
Metallurgical & Materials Engineering , , 2013
M50 | M51 		2013 I. Dimić, I. Cvijović-Alagić, M. Rakin, B. Bugarski
Odobren
115 Ciklična oksidacija legure na bazi Ti3Al intermetalnog jedinjenja
Tehnika– Novi materijali , , 2007
M50 | M51 		2007 I. Cvijović, M. T. Jovanović, D. Božić
Odobren
116 Ductile crack growth initiation in welded joints – micromechanical approach
Welding in the World, Special Issue: Safety and Reliability of Welded Components in Energy and Processing Industry , , 2008
M50 | M51 		2008 M. Rakin, N. Gubeljak, M. Dobrijević, B. Međo, I. Cvijović-Alagić, A. Sedmak
Odobren
117 Experimental and numerical analysis of tensile properties of Ti-13Nb-13Zr alloy and determination of influence of anodization process
Procedia Structural Integrity , , 2020
M50 | M51 		2020 D. Barjaktarević, B. Medjo, N. Gubeljak, I. Cvijović-Alagić, P. Štefane, V. Djokić, M. Rakin
Odobren
118 Influence of the Heat Treatment on the Tribological Characteristics of the Ti-based Alloy for Biomedical Applications
Tribology in Industry , , 2009
M50 | M51 		2009 I. Cvijović-Alagić, S. Mitrović, Z. Cvijović, Đ. Veljović, M. Babić, M. Rakin
Odobren
119 Metallic materials-application of TEM, EPMA and SEM in science and engineering practice
Metalurgija – Journal of Metallurgy (MJoM) , , 2009
M50 | M51 		2009 M.T. Jovanović, N. Ilić, I. Bobić, I. Cvijović-Alagić, V. Rajković, Z. Mišković
Odobren
120 Microstructures and tribological properties of ferrous coatings deposited by APS (Atmospheric Plasma Spraying) on Al-alloy substrate
FME Transactions , , 2006
M50 | M51 		2006 A. Vencl, M. Mrdak, I. Cvijović
Odobren
121 Processing and some applications of nickel, cobalt and titanium-based alloys
Metalurgija – Journal of Metallurgy (MJoM , , 2007
M50 | M51 		2007 M.T. Jovanović, B. Lukić, Z. Mišković, I. Bobić, I. Cvijović, B. Dimčić
Odobren
122 The corrosion resistance in artificial saliva of titanium and Ti-13Nb-13Zr alloy processed by high pressure torsion
Procedia Structural Integrity , , 2018
M50 | M51 		2018 D. Barjaktarević, J. Bajat, I. Cvijović-Alagić, I. Dimić, A. Hohenwarter, V. Đokić, Marko Rakin
Odobren
123 The influences of multiscale-sized second-phase particles on fracture behaviour of overaged 7000 alloys
Procedia Engineering, Special Issue: Mesomechanics 2009 , , 2009
M50 | M51 		2009 Z.Cvijovic, M. Vratnica, I. Cvijović-Alagić
Odobren
124 Uticaj kvaliteta površine dvofaznog čelika na pojavu selektivne oksidacije
Tehnika – Novi materijali , , 2005
M50 | M51 		2005 I. Cvijović
Odobren
125 Integritet medicinskih implanata od legura titana (drugi deo) / Integrity of Biomedical Implants of Titanium Alloys (Second Part)
Integtitet i vek konstrukcija – Structural Integrity and Life , , 2008
M50 | M52 		2008 I. Cvijović-Alagić, M. Rakin
Odobren
126 Integritet medicinskih implanata od legura titana (prvi deo) / Integrity of Biomedical Implants of Titanium Alloys (First Part)
Integtitet i vek konstrukcija – Structural Integrity and Life , , 2008
M50 | M52 		2008 I. Cvijović-Alagić, M. Rakin
Odobren
127 Effect of processing parameters on Ti3Al-based alloy high-temperature cyclic oxidation kinetics
Journal of Innovative Materials in Extreme Conditions , , 2021
M50 | M54 		2021 I. Cvijović-Alagić, M.T. Jovanović
Odobren
128 Effect of recasting on the structure and properties of commercial Ni-Cr dental alloy
Journal of Innovative Materials in Extreme Conditions (JIMEC) , , 2022
M50 | M54 		2022 V. Maksimović, A. Čairović, I. Cvijović-Alagić
Odobren
129 Journal of Innovative Materials in Extreme Conditions (abbr. JIMEC), ), vol.1 (2020)
Journal of Innovative Materials in Extreme Conditions , , 2020
M50 | M55 		2020 B. Matović (Editor-in-chief), V. Maksimović, I. Cvijović-Alagić, D. Zagorac (Editors), J. Zagorac (Journal Manager)
Odobren
130 Journal of Innovative Materials in Extreme Conditions (abbr. JIMEC), vol.2 (2021)
Journal of Innovative Materials in Extreme Conditions , , 2021
M50 | M55 		2021 B. Matović (Editor-in-chief), V. Maksimović, I. Cvijović-Alagić, D. Zagorac (Editors), J. Zagorac (Journal Manager)
Odobren
131 Journal of Innovative Materials in Extreme Conditions (abbr. JIMEC), vol.3 (2022)
Journal of Innovative Materials in Extreme Conditions (abbr. JIMEC) , , 2022
M50 | M55 		2022 B. Matović (Editor-in-chief), V. Maksimović, I. Cvijović-Alagić, D. Zagorac (Editors), J. Zagorac (Journal Manager)
Odobren
132 Savremeni materijali na bazi titana: od kosmonautike do biomedicinskog inženjerstva / Modern titanium-based materials: from cosmonautics to biomedical engineering
Institut „Vinča“ 70 godina u nauci , Beograd, Srbija , 2018
M60 | M62 		2018 I. Cvijović-Alagić
Odobren
133 Ciklična oksidacija legure na bazi Ti3Al intermetalnog jedinjenja
Peti seminar mladih istraživača: Nauka i inženjerstvo novih materijala , Belgrade, Serbia , 2006
M60 | M64 		2006 I. Cvijović, M. T. Jovanović, D. Božić
Odobren
134 Elektrohemisjka ispitivanja anodnih Ti-13Nb-13Zr nanotuba u simuliranoj telesnoj tečnosti, (Electrochemical behaviour of anodic Ti-13Nb-13Zr oxide nanotubes in simulated body fluid)
54. savetovanje Srpskog hemijskog društva / 5. konferencija mladih hemičara Srbije , Beograd, Srbija , 2017
M60 | M64 		2017 D.R. Barjaktarević, I.D. Dimić, I.Lj. Cvijović-Alagić, V.R. Đokić, J.B. Bajat, M.P. Rakin
Odobren
135 Uticaj kvaliteta površine dvofaznog čelika na pojavu selektivne oksidacije
Treći seminar mladih istraživača: Nauka i inženjerstvo novih materijala , Belgrade, Serbia and Montenegro , 2004
M60 | M64 		2004 Ivana Cvijović
Odobren
136 Otportnost prema oštećenju i lomu legura titana za primenu u medicini, Doktorska disertacija
Tehnološko-metalurški fakultet Univerziteta u Beogradu , Beograd , 2013
M70 | M71 		2013 Ivana Cvijović-Alagić
Odobren
137 Ciklična oksidacija legure na bazi Ti3Al intermetalnog jedinjenja, Magistarska teza
Tehnološko-metalurški fakultet Univerziteta u Beogradu , Beograd , 2006
M70 | M72 		2006 Ivana Cvijović
Odobren
138 Structural and Mechanical Properties of High Entropy Alloys (HEAS) - Ultra-High Temperature Ceramics (UHTC) on DFT Level
6th Conference of the Serbian Society for Ceramic Materials: 6CSCS-2022 , Beograd , 2022
M30 | M34 		2022 Dejan Zagorac, Ivana Cvijović-Alagić, Jelena Zagorac, Svetlana Butulija, Jelena Erčić, Ondrej Hanzel, Richard Sedlak, Maksym Lisnichuk, Tamara Škundrić, Milan Pejić, Dušica Jovanović, Peter Tatarko, Branko Matović
Odobren
139 Influence of laser irradiation parameters on the ultrafine-grained Ti 45Nb alloy surface characteristics
Surface and Coatings Technology , , 2021
M20 | M21 		2021 S. Laketić, M. Rakin, M. Momčilović, J. Ciganović, Đ. Veljović, I. Cvijović-Alagić
Odobren
140 Microstructural study of Ti 45Nb alloy before and after HPT processing using experimental and ab initio data mining approach
Materials Characterization , , 2020
M20 | M21a 		2020 I. Cvijović-Alagić, M. Rakin, S. Laketić, D. Zagorac
Odobren
141 Multicomponent solid solution with pyrochlore structure
Boletín de la Sociedad Española de Cerámica y Vidrio , , 2023
M20 | M21 		2023 Branko Matović, Jelena Maletaškić, Vesna Maksimović, Stevan P. Dimitrijević, Bratislav Todorović, Milan Pejić, Dejan Zagorac, Jelena Zagorac, Yu-Ping Zeng, Ivana Cvijović-Alagić
Odobren
142 Synthesis and characterization of high-entropy A2B2O7 pyrochlore with multiple elements at A and B sites
Science of Sintering , , 2023
M20 | M22 		2023 Branko Matovic, Jelena Maletaskic, Vesna Maksimovic, Silvana Dimitrijevic, Bratislav Todorovic, Jelena Zagorac, Aleksa Lukovic, Yu-Ping Zeng, Ivana Cvijovic-Alagic
Odobren
143 Novel basalt-stainless steel composite materials with improved fracture toughness
Science of Sintering , , 2023
M20 | M22 		2023 Vladimir Pavkov, Gordana Bakic, Vesna Maksimovic, Ivana Cvijovic-Alagic, Dusan Bucevac, Branko Matovic
Odobren
144 High-density glass-ceramic materials obtained by powder metallurgy
5th Metallurgical & Materials Engineering Congress of South-East Europe , Trebinje, Bosnia and Herzegovina , 2023
M30 | M34 		2023 Vladimir Pavkov, Gordana Bakić, Vesna Maksimović, Ivana Cvijović-Alagić, Marija Prekajski Đorđević, Dušan Bučevac, Branko Matović
Odobren
145 Andesite basalt as a natural raw material for obtaining glass-ceramics
7th Conference of The Serbian Society for Ceramic Materials , Belgrade, Serbia , 2023
M30 | M34 		2023 Vladimir Pavkov, Gordana Bakić, Vesna Maksimović, Dušan Bučevac, Marija Prekajski Đorđević, Ivana Cvijović-Alagić, Branko Matović
Odobren
146 Aluminum-based composites reinforced with ceramic fibers
7th Conference of The Serbian Society for Ceramic Materials , Belgrade, Serbia , 2023
M30 | M34 		2023 Danica Maksimović, Vladimir Pavkov, Vesna Maksimović, Barbara Putz, Ivana Cvijović-Alagić
Odobren
147 Laser-modified Ti-45Nb alloy’s response to bio-environment
The Advanced Research Workshop: Engineering Ceramics 2023 (EngCer 2023) , Smolenice castle, Slovakia , 2023
M30 | M34 		2023 I. Cvijović-Alagić, S. Laketić, M. Momčilović, J. Ciganović, Đ. Veljović, J. Bajat, V. Kojić, M. Rakin
Odobren
148 Characterization of High-Entropy A2B2O7 Pyrochlore Obtained via Combustion Synthesis and Post-Calcination
7th Conference of The Serbian Society for Ceramic Materials (7CSCS-2023) , Belgrade, Serbia , 2023
M30 | M34 		2023 A. Luković, B. Matović, J. Maletaškić, V. Maksimović, S. Dimitrijević, B. Todorović, J. Zagorac, Y-P. Zeng, I. Cvijović-Alagić
Odobren
149 Ultrafine-grained microstructure effect on the biomedical Ti-based alloy performance
5th International Conference on Structural Nano Composites (NANOSTRUC 2023) , Nicosia, Cyprus , 2023
M30 | M34 		2023 I. Cvijović-Alagić, S. Laketić, Đ. Veljović, V. Kojić, J. Bajat, M. Rakin
Odobren
150 Heavily doped high-entropy A2B2O7 pyrochlore
Processing and Application of Ceramics , , 2023
M20 | M23 		2023 Branko Matovic, Jelena Maletaskic, Vesna Maksimovic, Jelena Zagorac, Aleksa Lukovic, Yu-Ping Zeng, Ivana Cvijovic-Alagic
Odobren
151 Microstructure, hardness and fracture resistance of P235TR1 seam steel pipes of different diameters
Chemical Industry , , 2023
M20 | M23 		2023 Walid Musrati, Bojan Medjo, Ivana Cvijovic-Alagic, Nenad Gubeljak, Primoz Stefane, Zoran Radosavljevic, Marko Rakin
Odobren
152 The impact of laser surface scanning on β-titanium alloy surface features and biocompatibility
12th Conference of The Serbian Biochemical Society “Biochemistry in Biotechnology” , Belgrade, Serbia , 2023
M30 | M34 		2023 S. Laketić, M. Rakin, M. Momčilović, J. Ciganović, Đ. Veljović, V. Kojić, I. Cvijović-Alagić
Odobren
153 LASER-MODIFIED NANOGRAINED Ti-45Nb ALLOY’S PERFORMANCE IN BIO-ENVIRONMENT (predavanje po pozivu)
The 2nd Serbian Conference on Materials Application and Technology (SCOM 2023) , Belgrade, Serbia , 2023
M60 | M62 		2023 I. Cvijović-Alagić, S. Laketić, M. Momčilović, J. Bajat, J. Ciganović, V. Kojić, Đ. Veljović
Odobren
154 Effect of the laser surface scanning on the surface properties and biocompatibility of the titanium alloy produced by high-pressure torsion
9th Conference of Young Chemists of Serbia (CYCS 2023) , Novi Sad, Serbia , 2023
M60 | M64 		2023 Slađana R. Laketić, Miloš D. Momčilović, Vesna V. Kojić, Ivana Lj. Cvijović-Alagić
Odobren
155 Densification of additive-free B4C-SiC composites by spark plasma sintering
Journal of the European Ceramic Society , , 2023
M20 | M21a 		2023 B. Matović, P. Tatarko, V. Maksimović, J. Maletaškić, M. Stoiljković, O. Hanzel, I. Cvijović-Alagić
Odobren
156 Journal of Innovative Materials in Extreme Conditions (abbr. JIMEC), vol.4 (2023)
Journal of Innovative Materials in Extreme Conditions (abbr. JIMEC) , , 2023
M50 | M55 		2023 B. Matović (Editor-in-chief), V. Maksimović, I. Cvijović-Alagić, D. Zagorac (Editors), J. Zagorac (Journal Manager)
Odobren
157 The effect of sintering temperature on cavitation erosion in glass–ceramics based on coal fly ash
International Journal of Environmental Science and Technology , , 2024
M20 | M22 		2024 V. Savić, M. Dojčinović, V. Topalović, I. Cvijović-Alagić, J. Stojanović, S. Matijašević, S. Grujić
Odobren
158 The high-temperature applicability of the Ti,Nb-Al-C MAX phases-based bulk materials and vacuum-arc deposited films
2nd International Conference on Innovative Materials in Extreme Conditions (IMEC2024) , Belgrade, Serbia , 2024
M30 | M34 		2024 T. Prikhna, T.B. Serbenyuk, O.P. Ostash, V.B. Sverdun, А.S. Kuprin, B. Matović, I. Cvijović-Alagić, V.Ya. Podhurska
Odobren
159 Novel high entropy alloys for extreme environments
2nd International Conference on Innovative Materials in Extreme Conditions (IMEC2024) , Belgrade, Serbia , 2024
M30 | M34 		2024 I. Cvijović-Alagić, N. Kanas, J. Maletaškić, Abishek M, V. Maksimović
Odobren
160 Characterization of the high-pressure sintered TiAl-TiB2 composites
2nd International Conference on Innovative Materials in Extreme Conditions (IMEC2024) , Belgrade, Serbia , 2024
M30 | M34 		2024 V. Maksimović, V. Urbanovich, J. Maletaškić, V. Pavkov, I. Cvijović-Alagić
Odobren
161 The influence of stainless steel particles reinforcement on the fracture toughness of glass-ceramic matrix composite
2nd International Conference on Innovative Materials in Extreme Conditions (IMEC2024) , Belgrade, Serbia , 2024
M30 | M34 		2024 V. Pavkov, G. Bakić, V. Maksimović, I. Cvijović-Alagić, A. Maslarević, B. Rajičić, N. Milošević
Odobren
162 Enhanced aluminum matrix composites for structural applications
2nd International Conference on Innovative Materials in Extreme Conditions (IMEC2024) , Belgrade, Serbia , 2024
M30 | M34 		2024 I. Cvijović-Alagić, J. Maletaškić, V. Pavkov, S. Putić, B. Matović, V. Maksimović
Odobren
163 Impact of Microstructural and Surface Modifications on the Ti-45Nb Alloy’s Response to Bio-Environment
Acta Metallurgica Sinica (English Letters) , , 2024
M20 | M21 		2024 Ivana Cvijović-Alagić, Slađana Laketić, Miloš Momčilović, Jovan Ciganović, Jelena Bajat, Vesna Kojić
Odobren
164 Mechanical properties and behavior of the Ti–45Nb alloy subjected to extreme conditions
CrystEngComm , , 2024
M20 | M21 		2024 Dejan Zagorac, Dasari L. V. K. Prasad, Tamara Škundrić, Kedar Yadav, Surender Singh, Slađana Laketić, Jelena Zagorac, Miloš Momčilović, Ivana Cvijović-Alagić
Odobren
165 Improvement of the β-Ti alloy properties in bio-environment
XXV YuCorr , Divčibare, Srbija , 2024
M30 | M33 		2024 Slađana Laketić, Bojan Međo, Miloš Momčilović, Jelena Bajat, Đorđe Veljović, Vesna Kojić, Ivana Cvijović-Alagić
Odobren
166 Influence of dietary and feed additives based on polyvalent nanodispersed iron oxides obtained by electroerosive dispersion on human health and animal growth
2023 SUSTAINABLE INDUSTRIAL PROCESSING SUMMIT AND EXHIBITION (2023SIPS) , Hyatt's Dreams Playa Bonita, Panama , 2023
M30 | M33 		2023 T. Prikhna, M. Monastyrov, V. Shatilo, F. Marquis, V. Kovalenko, M. Novohatskyi, I. Cvijović-Alagić, I. Antonyuk-Shcheglova, B. Matović, J. Madej, S. Naskalova, O. Bondarenko, O. Prysiazhna
Odobren
167 Fabrication of Boron Carbide Ceramics Reinforced with Silicon Carbide Fibers
Ceramics International , , 2024
M20 | M21 		2024 Branko Matović, Jelena Maletaškić, Marija Prekajski Đorđević, Peter Tatarko, Ondrej Hanzel, Michal Hičák, Zdeněk Chlup, Ivana Cvijović-Alagić
Odobren

Citati

Broj citata Referenca Status
610.0 Link | Dokument
Odobren